aboutsummaryrefslogtreecommitdiff
path: root/slackupgrade
diff options
context:
space:
mode:
Diffstat (limited to 'slackupgrade')
-rw-r--r--slackupgrade208
1 files changed, 198 insertions, 10 deletions
diff --git a/slackupgrade b/slackupgrade
index 662b325..ff4d46f 100644
--- a/slackupgrade
+++ b/slackupgrade
@@ -1,6 +1,6 @@
#!/bin/bash
# slackupgrade - full upgrade of a Slackware installation
-# Copyright (C) 2019 Sergey Poznyakoff.
+# Copyright (C) 2019-2020 Sergey Poznyakoff.
#
# Slackware-upgrade-system is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as published
@@ -20,6 +20,7 @@ set -e
# Configuration directory
: ${SLACKUPGRADE_CONFDIR:=/etc/slackupgrade}
+: ${SLACKUPGRADE_PKGDIR:=/var/slackupgrade}
# Slackware root directory
rooturl=
# Log file name
@@ -41,10 +42,25 @@ install_packages=
keep_file=
# Max. count of backup files to keep
max_backup=4
+# Display progress bar when downloading
+progressbar=1
+# Operating mode. Possible values:
+# INCR Incremental mode. Archive for each package is downloaded prior
+# to its nstallation and removed immediately afterwards. This
+# ensures minimal disk space requirements.
+# SAFE Safe mode. All archives are first downloaded to
+# SLACKUPGRADE_PKGDIR and then installed. Each archive is removed
+# immediately after installing from it. This requires some 2.5G
+# of disk space at the beginning, which will be freed by the end
+# of upgrade.
+# AUTO Select incremental mode if there is enough disk space. If not,
+# ask the user if it is OK to proceed in incremental mode.
+opmode=AUTO
# Internal variables
remote=
tempdir=${TMP:-/tmp}/slackupg.$$
+strip_series=0
installed_list=$tempdir/installed.list
avail_index=$tempdir/avail.index
avail_list=$tempdir/avail.list
@@ -132,6 +148,8 @@ function error() {
fi
}
+# Abnormal termination: print error message, remove temporary directory
+# and terminate with status 1.
function abend() {
error "$@"
tempdir_remove
@@ -147,10 +165,8 @@ function package_file_name() {
fi
}
-function package_name_md5sum() {
- pkg=$(awk -vname=$1 '$1==name { print $3 }' $avail_index)
-}
-
+# check_package_md5sum PKG ARCHIVE
+# Verifies the MD5 sum of the ARCHIVE file for Slackware package PKG
function check_package_md5sum() {
if [ -n "$checksums" ]; then
awk -vcname="$1" -vdname="$2" \
@@ -159,10 +175,14 @@ function check_package_md5sum() {
fi
}
+# all_package_names
+# Lists all packages from the Slackware distribution.
function all_package_names() {
grep -v '.*/kde[^/]*/' $avail_index | cut -d ' ' -f 1
}
+# series_package_names S
+# Lists the names of packages in Slackware series S.
function series_package_names() {
grep '.*/'"$1/" $avail_index | cut -d ' ' -f 1
}
@@ -171,10 +191,14 @@ function catfile() {
echo $rooturl/${1#./}
}
+# download_curl FILE URL
+# Downloads file from URL to FILE using curl.
function download_curl {
curl $CURL_OPTIONS -L -sS -o$1 $2
}
+# download_wget LOCAL URL
+# Downloads file from URL to FILE using wget.
function download_wget {
if ! wget $WGET_OPTIONS -nv -o wget.log -O$1 $2; then
grep -i "failed\|error" wget.log
@@ -182,6 +206,8 @@ function download_wget {
fi
}
+# dnfunc_init
+# Initializes the downloader function to wget or curl.
function dnfunc_init() {
if [ -z "$dnfunc" ]; then
if wget --version >/dev/null 2>&1; then
@@ -194,17 +220,28 @@ function dnfunc_init() {
fi
}
+# download FILE
+# Downloads package FILE from the remote server. On success, returns the
+# full pathname of the downloaded copy.
function download() {
- local name=$(basename $1)
+ local name=$SLACKUPGRADE_PKGDIR/$(basename $1)
local url=$(catfile $1)
if $dnfunc $name $url; then
echo $name
fi
}
+# getfile PKG [GPG]
+# Retrieves the package archive file for the package PKG. If second argument
+# is non-empty, verifies the GPG signature of the file.
+# If checksums file is available, verifies also the MD5 checksum of the file.
+#
+# Returns full pathname of the retrieved file.
function getfile() {
local name=$(if [ -n "$remote" ]; then
download $1
+ elif [ $strip_series -eq 1 ]; then
+ catfile $(basename $1)
else
catfile $1
fi)
@@ -231,12 +268,17 @@ function getfile() {
echo $name
}
+# dropfile FILE
+# Removes FILE, if it has been downloaded from the remote repository,
function dropfile() {
- if [ -n "$remote" ]; then
+ if [ -n "$remote" ] || [ $strip_series -eq 1 ]; then
rm $1
fi
}
+# upgrade_package [OPTIONS] FILE
+# Runs upgradepkg with the supplied arguments and captures its output to
+# the log file. In verbose mode, filters parts of it to the stdout.
function upgrade_local() {
if [ -n "$dry_run" ]; then
echo "upgradepkg $@"
@@ -249,6 +291,8 @@ function upgrade_local() {
fi
}
+# upgrade_package NAME [OPTIONS]
+# Upgrades the package NAME. OPTIONS will be passed to upgradepkg verbatim.
function upgrade_package() {
local name=$1
shift
@@ -263,6 +307,8 @@ function upgrade_package() {
fi
}
+# version_gt A B
+# Returns true if version A is greater than B.
function version_gt() {
test "$(echo "$@" | tr " " "\n" | sort -V | head -n 1)" != "$1"
}
@@ -302,13 +348,67 @@ function backup() {
fi
}
+# disk_avail_size DIR
+# Returns the available disk size (in kilobytes) on the device where
+# DIR is located
+function disk_avail_size() {
+ df -k --output=target,avail | \
+ sed 1d | \
+ awk -vdir=$1 \
+ 'BEGIN { dirlen=length(dir) }
+ { len = length($1)
+ if (len <= dirlen && substr(dir, 1, len) == $1) {
+ if (mp_len < len) {
+ mp_len = len
+ mp_avail = $2
+ }
+ }
+ }
+ END { print mp_avail }'
+}
+
+# Downloads all selected packages to the spool directory.
+function download_all() {
+ info "downloading packages"
+ if [ ${COLUMNS:-0} -lt 10 ]; then
+ progressbar=0
+ fi
+ if [ $progressbar -eq 1 ]; then
+ total=$(wc -l candidates | cut -d ' ' -f 1)
+ width=$(( $COLUMNS - 7 ))
+ fi
+ i=0
+ cat candidates |
+ while read pkg
+ do
+ if [ $progressbar -eq 1 ]; then
+ n=$(( $i * $width / $total ))
+ s=$(printf "%${n}s" ' '|sed 's/./=/g')
+ printf "\r% 3d%% %s>" $(( $i * 100 / $total)) $s
+ fi
+ if [ -z "$dry_run" ]; then
+ file=$(getfile $(package_file_name $pkg))
+ if [ -z "$file" ]; then
+ abend "failed to download $pkg"
+ fi
+ fi
+ i=$(( $i + 1 ))
+ done || exit $?
+ if [ $progressbar -eq 1 ]; then
+ s=$(printf "%${width}s" ' '|sed 's/./=/g')
+ printf "\r% 3d%% %s|\n" 100 $s
+ fi
+}
+
# ##########
# Main
# ##########
-while getopts "ahknp:qs:vy" OPTION
+while getopts "ahIknp:qSs:vy" OPTION
do
case $OPTION in
+ I) opmode=INCR;;
+ S) opmode=SAFE;;
a) install_all=y;;
h) usage
exit 0;;
@@ -354,6 +454,10 @@ case "$(uname -m)" in
*) abend "architecture $(uname -m) is not yet supported"
esac
+if [ ! -d $SLACKUPGRADE_PKGDIR ]; then
+ mkdir -p $SLACKUPGRADE_PKGDIR || abend "can't create $SLACKUPGRADE_PKGDIR"
+fi
+
tempdir_create
cd $tempdir
@@ -394,6 +498,8 @@ if [ -z "$remote" ]; then
if [ ! -d $rooturl ]; then
abend "$rooturl does not exist"
fi
+ # Safe mode is meaningless with local repository
+ opmode=INCR
fi
# Check if rooturl contains all we need
@@ -477,7 +583,7 @@ fi) | sort -u > candidates.$$
comm -2 -3 $installed_list candidates.$$ > remove.list.$$
if [ -s "$keep_file" ]; then
grep -v '^#' $keep_file | \
- tr -s '\n' | sort | comm -2 -3 remove.list.$$ - > remove.list
+ tr -s '\n' | sort -u | comm -2 -3 remove.list.$$ - > remove.list
rm remove.list.$$
else
mv remove.list.$$ remove.list
@@ -536,6 +642,89 @@ if ! getyn n "Ready for upgrade from $VERSION to $newversion. Continue"; then
exit 0
fi
+if [ $opmode != INCR ]; then
+ # Automatic mode selection. Compute total compressed size of packages
+ # to be installed and compare it with available disk space on the device
+ # hosting SLACKUPGRADE_PKGDIR. Select safe mode if there is enough space,
+ # otherwise ask if the user wishes to continue in incremental mode.
+ packages=$(download PACKAGES.TXT)
+ if [ -z "$packages" ]; then
+ abend "PACKAGES.TXT not found in $rooturl"
+ fi
+ download_size=$(sed -n -r \
+ -e '/PACKAGE NAME:[[:space:]]*/{' \
+ -e 's///' \
+ -e 's/^(.*)-[^-]+-(i386|x86(_64)?|arm|noarch|fw)-[[:digit:]]+(_.*)?\.t.z$/\1 &/' \
+ -e h \
+ -e '}' \
+ -e '/PACKAGE SIZE \(compressed\):[[:space:]]*/{' \
+ -e 's///' \
+ -e H \
+ -e x \
+ -e 's/\n/ /' \
+ -e p \
+ -e '}' \
+ $packages | \
+ sort +0 -1 | \
+ join candidates - | \
+ awk '{ if ($4 == "M") s += $3*1024
+ else if ($4 == "G") s += $3*1024*1024
+ else s += $3 }
+ END { print s }')
+ avail_size=$(disk_avail_size $SLACKUPGRADE_PKGDIR)
+ if [ $avail_size -lt $download_size ]; then
+ error "not enough free space in $SLACKUPGRADE_PKGDIR"
+ error "needed ${download_size}K, but only ${avail_size}K available"
+ if [ $opmode = INCR ]; then
+ abend "terminating"
+ fi
+
+ cat >&2 <<EOT
+
+Safe mode is the default for slackupgrade. In this mode, the program would
+first download all packages from the remote site, verify them and then
+proceed to actual upgrade. This ensures that even if something goes wrong
+during the upgrade, you have all tarballs at hand and can resume from
+where you left after fixing the problem.
+
+This mode cannot be used due to the disk space shortage. Slackupgrade can
+nevertheless continue in incremental download mode. In this mode, it will
+download and install packages one by one. This takes more time and is less
+error prone. If you choose this mode, type 'Y' at the prompt below. Other-
+wise, type 'N' to terminate the program, and follow the instructions you
+will get.
+
+EOT
+
+ if getyn n "Continue in incremental download mode"; then
+ opmode=INCR
+ else
+ cat >&2 <<EOT
+
+Please make sure the slackupgrade spool directory can accomodate at least
+${download_size}K of data. To do so, either free sufficient disk space on
+the device where $SLACKUPGRADE_PKGDIR resides, or set the SLACKUPGRADE_PKGDIR
+environment variable to the full pathname of the new spool directory,
+
+EOT
+ error "Terminating."
+ exit 0
+ fi
+ else
+ # Download all packages
+ download_all
+ # Switch to the local installation mode
+ rooturl=$SLACKUPGRADE_PKGDIR
+ opmode=INCR
+ # Instruct getfile to strip off the series directory from the
+ # package names.
+ strip_series=1
+ # Disable remote indicator and checksum verification (all archives
+ # have already been verified during the download).
+ unset remote checksums
+ fi
+fi
+
info "starting upgrade of Slackware $VERSION to $newversion${dry_run:+ (DRY RUN MODE)}"
pkg_names="glibc-solibs pkgtools tar xz findutils"
@@ -630,4 +819,3 @@ bootloader has been updated for the new kernel!
Good luck!
EOF
fi
-

Return to:

Send suggestions and report system problems to the System administrator.