aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSergey Poznyakoff <gray@gnu.org.ua>2009-05-24 11:50:42 +0000
committerSergey Poznyakoff <gray@gnu.org.ua>2009-05-24 11:50:42 +0000
commitc1340f4e4f50a735cfcd3e5ac187b130d84e7056 (patch)
treef8573f13ced2808250f675023676253c9c9866b1
parentfa77efbc3d680dd0ae4de3ae68cd42cad1340ba3 (diff)
downloadipacct-c1340f4e4f50a735cfcd3e5ac187b130d84e7056.tar.gz
ipacct-c1340f4e4f50a735cfcd3e5ac187b130d84e7056.tar.bz2
Update autoconf machineryHEADmaster
-rw-r--r--.cvsignore4
-rw-r--r--INSTALL182
-rw-r--r--Makefile.am3
-rw-r--r--configure.ac6
-rwxr-xr-xylwrap170
5 files changed, 4 insertions, 361 deletions
diff --git a/.cvsignore b/.cvsignore
index a29694e..a07e86a 100644
--- a/.cvsignore
+++ b/.cvsignore
@@ -2,14 +2,10 @@ Makefile.in
Makefile
aclocal.m4
config.guess
-missing
config.h.in
-mkinstalldirs
config.sub
stamp-h.in
configure
-install-sh
-depcomp
config.log
config.h
stamp-h1
diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index b42a17a..0000000
--- a/INSTALL
+++ /dev/null
@@ -1,182 +0,0 @@
-Basic Installation
-==================
-
- These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
-
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
-
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
-
-Installation Names
-==================
-
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
- CPU-COMPANY-SYSTEM
-
-See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
- If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Operation Controls
-==================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
-
-`--help'
- Print a summary of the options to `configure', and exit.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
diff --git a/Makefile.am b/Makefile.am
index f05da89..20f5f34 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -1,5 +1,5 @@
# This file is part of IPACCT
-# Copyright (C) 1999,2000,2001,2002,2003,2004,2005,2008 Sergey Poznyakoff
+# Copyright (C) 1999,2000,2001,2002,2003,2004,2005,2008,2009 Sergey Poznyakoff
#
# Ipacct is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -14,7 +14,6 @@
# You should have received a copy of the GNU General Public License
# along with Ipacct. If not, see <http://www.gnu.org/licenses/>. */
-AUTOMAKE_OPTIONS = 1.6 readme-alpha
ACLOCAL_AMFLAGS = -I m4
SUBDIRS=lib src m4
diff --git a/configure.ac b/configure.ac
index 542c54e..c2d80af 100644
--- a/configure.ac
+++ b/configure.ac
@@ -15,11 +15,11 @@
# along with Ipacct. If not, see <http://www.gnu.org/licenses/>. */
AC_PREREQ(2.53)
-AC_INIT(ipacct, 1.0, bug-ipacct@gnu.org.ua)
+AC_INIT([ipacct], [1.0], [bug-ipacct@gnu.org.ua])
AC_CONFIG_SRCDIR(src/ipacct.h)
-AC_CANONICAL_SYSTEM
-AM_INIT_AUTOMAKE(no-exeext)
+AC_CONFIG_AUX_DIR([build-aux])
AM_CONFIG_HEADER(config.h)
+AM_INIT_AUTOMAKE([1.10 readme-alpha])
dnl Checks for programs.
AC_PROG_CC
diff --git a/ylwrap b/ylwrap
deleted file mode 100755
index d8f37e6..0000000
--- a/ylwrap
+++ /dev/null
@@ -1,170 +0,0 @@
-#! /bin/sh
-# ylwrap - wrapper for lex/yacc invocations.
-# Copyright 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Usage:
-# ylwrap PROGRAM [ARGS] INPUT [OUTPUT DESIRED]... -- [-yy repl] [ARGS]...
-# * PROGRAM is program to run; options can follow but must start with `-'.
-# * INPUT is the input file
-# * OUTPUT is file PROG generates
-# * DESIRED is file we actually want
-# * ARGS are passed to PROG
-# * Optional -yy introduces the sequence to replace yy prefixes with.
-# Any number of OUTPUT,DESIRED pairs may be used.
-
-# The program to run.
-prog="$1"
-shift
-# Make any relative path in $prog absolute.
-case "$prog" in
- /* | [A-Za-z]:*) ;;
- */*) prog="`pwd`/$prog" ;;
-esac
-
-# We also have to accept options here and append them to the program.
-# Why? Suppose YACC is set to `bison -y'. Clearly nobody uses
-# ylwrap, or this would have been discovered earlier!
-while :; do
- case "$1" in
- -*)
- prog="$prog $1"
- shift
- ;;
- *)
- break
- ;;
- esac
-done
-
-# The input.
-input="$1"
-shift
-case "$input" in
- /* | [A-Za-z]:*)
- # Absolute path; do nothing.
- ;;
- *)
- # Relative path. Make it absolute.
- input="`pwd`/$input"
- ;;
-esac
-
-# The directory holding the input.
-input_dir="`echo $input | sed -e 's,/[^/]*$,,'`"
-# Quote $INPUT_DIR so we can use it in a regexp.
-# FIXME: really we should care about more than `.'.
-input_rx="`echo $input_dir | sed -e 's,\.,\\\.,g'`"
-
-echo "got $input_rx"
-
-pairlist=
-while test "$#" -ne 0; do
- if test "$1" = "--"; then
- shift
- break
- fi
- pairlist="$pairlist $1"
- shift
-done
-
-if [ $# -ne 0 ]; then
- if [ "x$1" = "x-yy" ]; then
- shift
- if [ $# -eq 0 ]; then
- echo "ylwrap: -yy requires an argument"
- exit 1
- fi
- YYREPL=$1
- shift
- fi
-fi
-
-# FIXME: add hostname here for parallel makes that run commands on
-# other machines. But that might take us over the 14-char limit.
-dirname=ylwrap$$
-trap "cd `pwd`; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15
-mkdir $dirname || exit 1
-
-cd $dirname
-
-$prog ${1+"$@"} "$input"
-status=$?
-
-if test $status -eq 0; then
- set X $pairlist
- shift
- first=yes
- # Since DOS filename conventions don't allow two dots,
- # the DOS version of Bison writes out y_tab.c instead of y.tab.c
- # and y_tab.h instead of y.tab.h. Test to see if this is the case.
- y_tab_nodot="no"
- if test -f y_tab.c || test -f y_tab.h; then
- y_tab_nodot="yes"
- fi
-
- while test "$#" -ne 0; do
- from="$1"
- # Handle y_tab.c and y_tab.h output by DOS
- if test $y_tab_nodot = "yes"; then
- if test $from = "y.tab.c"; then
- from="y_tab.c"
- else
- if test $from = "y.tab.h"; then
- from="y_tab.h"
- fi
- fi
- fi
- if test -f "$from"; then
- # If $2 is an absolute path name, then just use that,
- # otherwise prepend `../'.
- case "$2" in
- /* | [A-Za-z]:*) target="$2";;
- *) target="../$2";;
- esac
-
- # Edit out `#line' or `#' directives. We don't want the
- # resulting debug information to point at an absolute srcdir;
- # it is better for it to just mention the .y file with no
- # path.
- EXPR="/^#/ s,$input_rx/,,"
- if [ ! -z "$YYREPL" ]; then
- EXPR="$EXPR;s/yy/$YYREPL/g"
- fi
- sed -e "$EXPR" "$from" > "$target" || status=$?
- else
- # A missing file is only an error for the first file. This
- # is a blatant hack to let us support using "yacc -d". If -d
- # is not specified, we don't want an error when the header
- # file is "missing".
- if test $first = yes; then
- status=1
- fi
- fi
- shift
- shift
- first=no
- done
-else
- status=$?
-fi
-
-# Remove the directory.
-cd ..
-rm -rf $dirname
-
-exit $status

Return to:

Send suggestions and report system problems to the System administrator.