aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorSergey Poznyakoff <gray@gnu.org>2016-07-30 10:14:19 +0300
committerSergey Poznyakoff <gray@gnu.org>2016-07-30 10:19:04 +0300
commit71e51308e7fe0136b76799f5e6dbbec94e279f46 (patch)
tree820ee704751fd7a498464ecfb5c42ea6da530ead
parentbde49d719c1894d0e502a73d42ab546d905492f2 (diff)
downloaddico-71e51308e7fe0136b76799f5e6dbbec94e279f46.tar.gz
dico-71e51308e7fe0136b76799f5e6dbbec94e279f46.tar.bz2
Rename modinc to bootstrap.modinc
* modinc: Rename to bootstrap. * bootstrap: Add generic bootstrapping code. * stub.ac: Rename to configure.boot. * Makefile.am: Fix EXTRA_DIST * README-hacking: Document bootstrap.
-rw-r--r--Makefile.am4
-rw-r--r--README-hacking36
-rwxr-xr-xbootstrap807
-rw-r--r--configure.boot (renamed from stub.ac)10
-rwxr-xr-xmodinc641
5 files changed, 813 insertions, 685 deletions
diff --git a/Makefile.am b/Makefile.am
index a157141..fa15921 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -1,8 +1,8 @@
# This file is part of GNU Dico
-# Copyright (C) 1998-2000, 2008-2010, 2012 Sergey Poznyakoff
+# Copyright (C) 1998-2000, 2008-2010, 2012, 2016 Sergey Poznyakoff
#
# GNU Dico is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3, or (at your option)
# any later version.
#
@@ -31,13 +31,13 @@ SUBDIRS=\
scripts\
imprimatur\
doc\
po
#FIXME: add these when ready: makedict client fonts
-EXTRA_DIST = ChangeLog.2008 stub.ac modinc
+EXTRA_DIST = ChangeLog.2008 configure.boot bootstrap
dist-hook:
tar -C $(srcdir) -c -f - --exclude-vcs app dicoweb | \
tar -C $(distdir) -x -f -
# Start Git ChangeLog from this date.
diff --git a/README-hacking b/README-hacking
index 74cb866..7037357 100644
--- a/README-hacking
+++ b/README-hacking
@@ -39,45 +39,49 @@ which are extracted from other source packages:
cd dico
2. Run
./bootstrap
+Use one or more --verbose options to see details about its progress.
+
Once done, proceed as described in the file README (section
INSTALLATION).
-Normally you will have to run bootstrap only once. However, if you
-intend to hack on Dico, you might need to run it again later. In
-this case, you will probably want to save some time and bandwidth by
-avoiding downloading the same files again. If so, create in the project's
-root directory a file named `.bootstrap' with the following
-contents:
-
- --gnulib-srcdir=$HOME/gnulib
-
-Replace `$HOME/gnulib' with the actual directory where the Gnulib
-sources reside.
-
For more information about `bootstrap', run `bootstrap --help'.
* Debugging
-To debug dictd, use the following command:
+To debug dicod, use the following command:
- libtool --mode execute gdb dictd
+ libtool --mode execute gdb dicod
For debugging from Emacs run:
- M-x gdb RET gud-wrapper dictd RET
+ M-x gdb RET gud-wrapper dicod RET
(the script gud-wrapper is located in the ./utils subdirectory)
+* Adding new modules
+
+If you want to add a new module to Dico (e.g. named `foo'), run the
+following command from the Dico source tree topmost directory:
+
+ ./bootstrap --add foo
+
+This will create the directory modules/foo, populate it with the
+necessary files, and add the appropriate statements to configure.ac
+and modules/Makefile.am files.
+
+After running this command, change to the modules/foo directory and
+start hacking on your new module.
+
* Copyright information
-Copyright (C) 2008, 2010, 2012 Sergey Poznyakoff
+Copyright (C) 2008, 2010, 2012, 2016 Sergey Poznyakoff
Permission is granted to anyone to make or distribute verbatim copies
of this document as received, in any medium, provided that the
copyright notice and this permission notice are preserved,
thus giving the recipient permission to redistribute in turn.
diff --git a/bootstrap b/bootstrap
index 7589553..5a3ce01 100755
--- a/bootstrap
+++ b/bootstrap
@@ -1,23 +1,784 @@
-#! /bin/sh
-
-chksrc() {
- test -f modinc || return 1
- test -f stub.ac || return 1
- src=`sed -n 's/AC_CONFIG_SRCDIR(\[\(.*\)\]).*/\1/p' stub.ac`
- test -n "$src" || return 1
- test -f $src
-}
-
-if ! chksrc; then
- echo "$0: must be run from the Dico source tree root directory"
- exit 1
-fi
-
-set -e
-git submodule init
-git submodule update
-./modinc
-set +e
-gnulib=gnulibinit
-test -L $gnulib || ln -sf ./gnulib/build-aux/bootstrap $gnulib
-./$gnulib
+#! /usr/bin/perl
+# This file is part of GNU Dico
+# Copyright (C) 2014, 2016 Sergey Poznyakoff
+#
+# GNU Dico is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+#
+# GNU Dico is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Dico. If not, see <http://www.gnu.org/licenses/>.
+
+=head1 NAME
+
+bootstrap - Bootstrap the Dico project
+
+=head1 SYNOPSIS
+
+B<bootstrap>
+[B<-ahmnv>]
+[B<--add>]
+[B<--help>]
+[B<--new>]
+[B<--modules>]
+[B<--dry-run>]
+[B<--verbose>]
+[I<NAME>...]
+
+=head1 DESCRIPTION
+
+Bootstrap the Dico project. This is the first command that should be run
+after cloning the project from the repository in order to be able to built
+it.
+
+When run without arguments performs the following actions:
+
+=over 4
+
+=item 1. Pulls in git submodules.
+
+=item 2. Creates autoconf/automake sources for building Dico modules.
+
+Recreates F<configure.ac> and F<modules/Makefile.am> from stub files
+F<configure.boot> and F<modules/stub.am>. The list of modules is obtained
+from the contents of the F<modules> directory -- each subdirectory
+is supposed to contain one module.
+
+Additional F<configure.ac> code for each module is obtained from
+file F<module.ac> in each module directory. See the description of
+this file in section B<FILES>.
+
+=item 3. Bootstraps the B<gnulib> submodule.
+
+=back
+
+The program must be run from the Dico source tree topmost directory.
+
+When given the B<-m> (B<--modules>) option, only the second step is
+performed.
+
+When run with B<-a> (B<--add>, B<--new>) option, the program creates
+basic infrastructure for modules named in the command line. For each
+I<NAME> it creates directory F<modules/I<NAME>>. Withih that directory,
+it creates two files: F<Makefile.am> from F<modules/template.am>, and
+F<I<NAME>.c>, which contains a stub code for the module. The new module
+is then integrated into F<configure.ac> and F<modules/Makefile.am> files.
+
+By default, the program prints only error diagnostics. That means that
+upon success, it will terminate quietly, without producing a single line
+on output. This can be changed using the B<-v> (or B<--verbose>) option.
+When the option is given once, the program prints general description before
+running each of the three steps described above. Two B<-v> options instruct
+it to also print whatever output that was generated when running auxiliary
+commands. Finally, three B<-v>'s produce additional debugging information.
+
+The B<-n> (B<--dry-run>) option instructs the tool to print what would have
+been done without actually doing it.
+
+=head1 OPTIONS
+
+=over 4
+
+=item B<-a>, B<--add>, B<--new>
+
+Create basic infrastructure for modules named in the command line and
+add them to F<configure.ac> and F<modules/Makefile.am>
+
+=item B<-n>, B<--dry-run>
+
+Don't do anything, just print what would have been done.
+
+=item B<-m>, B<--modules>
+
+Run only the second step: creation of autoconf/automake sources for
+Dico modules.
+
+=item B<-v>, B<--verbose>
+
+Increase output verbosity. Multiple options accumulate.
+
+=back
+
+The following options are passed to the B<gnulib> bootstrap script
+verbatim:
+
+=over 4
+
+=item B<--gnulib-srcdir=>I<DIRNAME>
+
+Specifies the local directory where B<gnulib> sources reside. Use this if
+you already have gnulib sources on your machine, and do not want to waste
+your bandwidth downloading them again.
+
+=item B<--no-git>
+
+Do not use git to update B<gnulib>. Requires that B<--gnulib-srcdir> point
+to a correct gnulib snapshot.
+
+=item B<--skip-po>
+
+Do not download po files.
+
+=back
+
+The following options cause the program to display informative text and
+exit:
+
+=over 4
+
+=item B<-h>
+
+Show a short usage summary.
+
+=item B<--help>
+
+Show man page.
+
+=item B<--usage>
+
+Show a concise command line syntax reminder.
+
+=back
+
+=head1 FILES
+
+The following files are used as templates to create output files. When
+creating output file, each line from the corresponding template is read,
+I<macro expansion> is performed, and the resulting string is written to the
+output file.
+
+During macro expansion, each occurrence of B<< <I<NAME>> >> is replaced with
+the contents of the macro variable I<NAME>, if it is defined. Expansion
+of undefined variables leaves the text as is.
+
+The construct B<< <I<NAME>#I<TEXT>> >> is expanded if it appears on a line
+alone, possibly preceded by any string of characters. It works similarly
+to B<< <I<NAME>> >>, except that if I<NAME> expands to multiple lines, the
+second and subsequent lines of expansion are prefixed with I<TEXT> on output.
+If I<TEXT> is empty, the content of the source line immediately preceding the
+construct is used instead. This makes it possible to use expansions after a
+comment character. E.g. if the variable B<HEADING> contains:
+
+ This file is generated automatically.
+ Please, do not edit.
+ See the docs for more info.
+
+and the input file contains:
+
+ dnl <HEADING#>
+
+Then, the resulting expansion will be:
+
+ dnl This file is generated automatically.
+ dnl Please, do not edit.
+ dnl See the docs for more info.
+
+The macro variables are specific for each file, and are described below.
+
+For each file, a special comment sequence is defined. Lines beginning
+with that sequence are omitted from the output.
+
+=over 4
+
+=item F<configure.boot>
+
+Produces the F<configure.ac> file. Comment marker is B<##>.
+The following variables are defined:
+
+=over 8
+
+=item B<MODULES>
+
+B<Autoconf> code for each module, obtained from the F<module.ac>
+files.
+
+=item B<HEADING>
+
+Generates an initial header text, warning the reader that the file is
+generated automatically and informing him about the ways to recreate
+that file.
+
+=item B<STATUS_OUTPUT>
+
+A list of printable description for modules that can be disabled. Each
+module is represented with a line
+
+ MODNAME ................ STATUS
+
+where MODNAME is the module name and STATUS is the module status variable
+(which produces B<yes> or B<no> at configure time, depending on whether
+the module is enabled or not).
+
+This is intended for use in B<AC_CONFIG_COMMANDS>.
+
+=item B<STATUS_DEFN>
+
+A list of assignments for module status variables, intended
+for use in B<AC_CONFIG_COMMANDS>.
+
+=back
+
+The following code illustrates the use of the latter two variables:
+
+ AC_CONFIG_COMMANDS([status],[
+echo<STATUS_OUTPUT>
+],
+ [<STATUS_DEFN>])
+
+=item F<modules/*/module.ac>
+
+This file is optional. If present, it contains the B<autoconf> code for
+that module, which is appended to the contents of the B<MODULES> variable
+used for creating F<configure.ac>.
+
+No macro substitutions are performed for that file.
+
+Comment marker is B<##>.
+
+The following comments starting with B<## module> are I<pragmatic> ones,
+and are treated specially:
+
+=over 8
+
+=item B<## module name: I<NAME>>
+
+Use I<NAME> as module name when creating variable names for that module. This
+is useful when the module name contains symbols that cannot be used in variable
+names (as in, e.g. B<dict.org>).
+
+=item B<## module description: I<TEXT>>
+
+Use I<TEXT> as module description in B<STATUS_OUTPUT> (see F<configure.boot>).
+
+=item B<## module category:>
+
+Reserved for future use.
+
+=back
+
+As well as other B<##> comments, these comments do not appear in the output.
+
+=item F<modules/stub.am>
+
+Produces the file F<modules/Makefile.am>. Comment marker is B<##>.
+
+Macro variables:
+
+=over 8
+
+=item B<HEADING>
+
+Same as in F<configure.boot>.
+
+=item B<MODULES>
+
+Produces B<Makefille.am> code for the B<SUBDIRS> variable.
+
+=back
+
+=item F<modules/template.c>
+
+This template is used when B<-a> (B<--add>, B<--new>) option is given.
+It produces the file F<modules/I<NAME>/I<NAME>.c>. Comment marker is B<//>.
+
+Macro variables:
+
+=over 8
+
+=item B<MODNAME>
+
+Expands to the name of the module.
+
+=back
+
+=item F<modules/template.am>
+
+This template is used when B<-a> (B<--add>, B<--new>) option is given.
+It produces the file F<modules/I<NAME>/Makefile.am>.
+
+Macro variables:
+
+=over 8
+
+=item B<MODNAME>
+
+Expands to the name of the module.
+
+=back
+
+=back
+
+=head1 EXIT CODES
+
+=over 4
+
+=item B<0>
+
+Successful termination.
+
+=item B<64>
+
+Command line usage error.
+
+=item B<66>
+
+Can't open input file.
+
+=item B<73>
+
+Can't create output file.
+
+=back
+
+=head1 BUGS
+
+Error handling can be made better.
+
+=cut
+
+use strict;
+use Getopt::Long qw(:config gnu_getopt no_ignore_case);
+use Pod::Usage;
+use Pod::Man;
+use File::Temp qw(tempfile);
+use File::Basename;
+use Data::Dumper;
+use IPC::Open3;
+use Symbol 'gensym';
+
+use constant EX_OK => 0;
+use constant EX_USAGE => 64; # command line usage error
+use constant EX_DATAERR => 65; # data format error
+use constant EX_NOINPUT => 66; # cannot open input file
+use constant EX_SOFTWARE => 70; # internal software error (not used yet)
+use constant EX_CANTCREAT => 73; # can't create (user) output file
+
+my $progname = basename($0);
+my $progdescr = "Recreate Dico module autoconf structure";
+my $addmod;
+my $dry_run;
+my $verbose;
+my $modules;
+my @gnulib_options;
+my $autoconf = "module.ac";
+my $config_stub = "configure.boot";
+my $makefile_stub = "modules/stub.am";
+my $makefile = "modules/Makefile.am";
+my %outfile;
+
+my %categories; # not used now
+
+sub error {
+ my $msg = shift;
+ local %_ = @_;
+ my $fd = defined($_{fd}) ? $_{fd} : \*STDERR;
+ print $fd "$progname: " if defined($progname);
+ print $fd "$_{prefix}: " if defined($_{prefix});
+ print $fd "$msg\n"
+}
+
+sub abend {
+ my $code = shift;
+ print STDERR "$progname: " if defined($progname);
+ print STDERR "@_\n";
+ exit $code;
+}
+
+my $status = 0;
+
+sub rewrite_configure_ac {
+ my $ref = shift;
+
+ my %vartab = (
+ 'overwrite' => 1,
+ 'tempfile' => 1,
+ 'ignorecomm' => '##',
+ 'HEADING' => "Do not edit. -*- mode: autoconf; buffer-read-only: t; -*- vi: set ro:\
+This file is created automatically from $config_stub.\
+To recreate, run $progname from the top of Dico source tree.
+",
+ 'MODULES' => sub {
+ my $s;
+
+ foreach my $name (sort keys %{$ref}) {
+ my $h = $ref->{$name};
+ $s .= "# Module $name\n";
+ if (defined($h->{autoconf})) {
+ open(my $afd, "<", $h->{autoconf})
+ or abend(EX_NOINPUT,
+ "can't open $h->{autoconf} for reading: $!");
+ while (<$afd>) {
+ next if /^##/;
+ $s .= $_;
+ }
+ close $afd;
+ }
+ $s .= "\n";
+ $s .= "DICO_TESTS($h->{dir})\n" if ($h->{tests});
+ $s .= "AC_CONFIG_FILES([$h->{dir}/Makefile])\n";
+ $s .= "\n# End of module $name\n\n";
+ }
+ return $s;
+ },
+ 'STATUS_OUTPUT' => sub {
+ return join "\n",
+ map {
+ my $n;
+ if (defined($ref->{$_}{descr})) {
+ $n = $ref->{$_}{descr};
+ } else {
+ $n = $_;
+ $n =~ s/\b(\w)/\U$1/g;
+ }
+
+ my $l = 34 - length($n) - 2;
+
+ "$n " .
+ (($l > 0) ? '.' x $l : '') .
+ " \$status_$ref->{$_}{modname}";
+ }
+ grep { $ref->{$_}{status} }
+ sort keys %{$ref};
+ },
+ 'STATUS_DEFN' => sub {
+ return join "\n",
+ map { "status_$ref->{$_}{modname}=\$status_$ref->{$_}{modname}" }
+ grep { defined($ref->{$_}{status}) }
+ sort keys %{$ref};
+ }
+ );
+ make_file($config_stub, "configure.ac", \%vartab);
+}
+
+sub rewrite_makefile {
+ my $ref = shift;
+
+ my %vartab = (
+ 'overwrite' => 1,
+ 'tempfile' => 1,
+ 'ignorecomm' => '##',
+ 'HEADING' => "Do not edit. -*- buffer-read-only: t; -*- vi: set ro:\
+This file is created automatically from $makefile_stub.\
+To recreate, run $progname from the top of Dico source tree.
+",
+ 'MODULES' => sub {
+ my $s;
+ foreach my $am (map { $ref->{$_}{am} }
+ grep { defined($ref->{$_}{am}) }
+ sort keys %{$ref}) {
+ $s .= "$am\n";
+ }
+ $s .= "SUBDIRS=";
+ foreach my $dir (map { $ref->{$_}{SUBDIRS} } sort keys %{$ref}) {
+ $s .= "\\\n $dir";
+ }
+ $s .= "\n";
+ return $s;
+ }
+ );
+ make_file($makefile_stub, $makefile, \%vartab);
+}
+
+sub add_module {
+ my ($name,$ref) = @_;
+ my $dir = "modules/$name";
+
+ error("adding module $name", prefix=>'DEBUG') if ($verbose>1);
+ my $acname = uc($name);
+ $ref->{$name}{dir} = $dir;
+ $ref->{$name}{SUBDIRS} = $name;
+ $ref->{$name}{modname} = $name;
+ if (-r "$dir/$autoconf") {
+ $ref->{$name}{autoconf} = "$dir/$autoconf";
+ open(my $fd, "<", "$dir/$autoconf")
+ or abend(EX_NOINPUT,
+ "can't open $dir/$autoconf for reading: $!");
+ while (<$fd>) {
+ chomp;
+ s/\s+$//;
+ if (/^##\s*module\s+name\s*:\s*([^\s]+).*$/) {
+ $ref->{$name}{modname} = $1;
+ } elsif (/^##\s*module\s+description\s*:\s*(.+).*$/) {
+ $ref->{$name}{descr} = $1;
+ } elsif (/^##\s*module\s+category\s*:\s*(.+).*$/) {
+ $ref->{$name}{category} = $1;
+ $categories{$1}++;
+ }
+ s/#.*//;
+ next if ($_ eq "");
+ if (/AM_CONDITIONAL\s*\(\s*\[${acname}_COND\]/) {
+ $ref->{$name}{am} = <<EOT;
+if ${acname}_COND
+ ${acname}_DIR=$name
+endif
+EOT
+;
+ $ref->{$name}{SUBDIRS} = "\$(${acname}_DIR)";
+ }
+ $ref->{$name}{status} = 1
+ if (!$ref->{$name}{status} and /status_$ref->{$name}{modname}=/);
+ }
+ close $fd;
+ }
+ $ref->{$name}{tests} = (-d "$dir/tests"
+ and -f "$dir/tests/Makefile.am"
+ and -f "$dir/tests/testsuite.at");
+
+ if (-f "$dir/Makefile.am") {
+ open(my $fd, "<", "$dir/Makefile.am")
+ or abend(EX_NOINPUT,
+ "can't open $dir/$autoconf for reading: $!");
+ my %checks = ('mod' => "mod_LTLIBRARIES does not contain $ref->{$name}{modname}.la",
+ 'SOURCES' => "$ref->{$name}{modname}_la_SOURCES not defined");
+ while (<$fd>) {
+ chomp;
+ s/\s+$//;
+ s/#.*//;
+ next if ($_ eq "");
+ if (/mod_LTLIBRARIES\s*=\s*$ref->{$name}{modname}.la/) {
+ delete $checks{mod};
+ } elsif (/$ref->{$name}{modname}_la_SOURCES\s*=/) {
+ delete $checks{SOURCES};
+ }
+ }
+ close $fd;
+ if (keys(%checks)) {
+ while (my ($k,$v) = each %checks) {
+ error("$dir/Makefile.am: $v");
+ }
+ $status = EX_DATAERR;
+ return;
+ }
+ }
+
+ if ($verbose>2) {
+ print STDERR "module $name:\n";
+ print STDERR Dumper($ref->{$name});
+ }
+}
+
+sub replace_macro {
+ my $name = shift;
+ my $ref = shift;
+
+ my $s;
+
+ if (defined($ref->{$name})) {
+ if (ref($ref->{$name}) eq 'CODE') {
+ $s = &{$ref->{$name}};
+ } else {
+ $s = $ref->{$name};
+ }
+ } else {
+ $s = "<$name>";
+ }
+
+ return $s;
+}
+
+sub make_file {
+ my $infile = shift;
+ my $ofile = shift;
+ my $ref = shift;
+
+ error("creating $ofile from $infile", prefix => 'DEBUG') if ($verbose>1);
+ return if $dry_run;
+ if (!$ref->{overwrite} and -e $ofile) {
+ error("$ofile already exists", prefix => 'warning');
+ } else {
+ open(my $ifd, "<", $infile)
+ or abend(EX_DATAERR, "can't open $infile for reading: $!");
+
+ my $ofd;
+ if (defined($ref->{tempfile})) {
+ my $tempname;
+ ($ofd, $tempname) = tempfile(DIR => dirname($infile))
+ or abend(EX_CANTCREAT,
+ "can't open temporary file for creating $ofile: $!");
+ $outfile{$tempname} = $ofile;
+ } else {
+ open($ofd, ">", $ofile)
+ or abend(EX_CANTCREAT, "can't open $ofile for writing: $!");
+ }
+ while (<$ifd>) {
+ next if (defined($ref->{ignorecomm}) and /^$ref->{ignorecomm}/);
+ if (/^(.*)<([A-Z][A-Z0-9_]+)#([^>]*)>\s*$/) {
+ my $pfx = $3 || $1;
+ $_ = $1 . replace_macro($2, $ref);
+ chomp;
+ s/\n/\n$pfx/g;
+ $_ .= "\n";
+ } else {
+ s/<([A-Z][A-Z0-9_]+)>/replace_macro($1, $ref)/gex;
+ }
+ print $ofd $_;
+ }
+ close($ifd);
+ close($ofd);
+ }
+}
+
+sub create_module {
+ my $name = shift;
+ my $dir = "modules/$name";
+
+ if (-d $dir) {
+ error("$dir already exists", prefix => 'warning');
+ } else {
+ error("creating $dir", prefix => 'DEBUG') if ($verbose>1);
+ mkdir($dir) unless $dry_run;
+ }
+ make_file("modules/template.am", "$dir/Makefile.am",
+ { ignorecomm => '##',
+ MODNAME => $name });
+ make_file("modules/template.c", "$dir/${name}.c",
+ { ignorecomm => '//',
+ MODNAME => $name });
+}
+
+sub cleanup {
+ foreach my $f (keys %outfile) {
+ unlink $f if (-e $f);
+ }
+}
+
+sub checksrc {
+ return 0 unless -e $config_stub;
+ open(my $fd, '<', $config_stub)
+ or abend(EX_NOINPUT, "can't open $config_stub: $!");
+ my $anchor;
+ while (<$fd>) {
+ chomp;
+ s/^\s+//;
+ if (/^AC_CONFIG_SRCDIR\(\[(.*)\]\)/) {
+ $anchor = $1;
+ last;
+ }
+ }
+ close $fd;
+ abend(EX_DATAERR, "AC_CONFIG_SRCDIR not found in $config_stub")
+ unless defined $anchor;
+ return -e $anchor;
+}
+
+sub modproc {
+ my %modtab;
+ my @modnames = map { s#modules/##; $_; } grep { -d $_; } glob "modules/*";
+
+ error("Bootstrapping dico modules", fd => \*STDOUT) if $verbose;
+
+ foreach my $m (@modnames) {
+ add_module($m, \%modtab);
+ }
+
+ rewrite_configure_ac(\%modtab);
+ rewrite_makefile(\%modtab);
+
+ if ($status == 0 and !$dry_run) {
+ while (my ($from, $to) = each %outfile) {
+ rename $from, $to
+ or abend(EX_CANTCREAT, "can't rename $from to $to: $!");
+ }
+ }
+}
+
+sub run {
+ error("running @_", prefix=>'DEBUG') if ($verbose>2);
+ return if $dry_run;
+ my $out = gensym;
+ open(my $err, ">&", \*STDERR) or die "can't dup STDERR: $!";
+ open(my $in, "<&", \*STDIN) or die "can't dup STDIN: $!";
+ my $pid = open3($in, $out, $err, @_);
+ my $logpid;
+ if ($verbose > 1) {
+ $logpid = fork();
+ if ($logpid == 0) {
+ while (<$out>) {
+ chomp;
+ error($_, fd => \*STDOUT, prefix => "[$_[0]]");
+ }
+ exit;
+ }
+ }
+ waitpid($pid, 0);
+ my $ret = 0;
+ if ($? == -1) {
+ abend(EX_CANTCREAT, "failed to run @_");
+ } elsif ($? & 127) {
+ abend(EX_CANTCREAT, "$@ exited on signal " . ($? & 127));
+ } elsif (my $e = ($? >> 8)) {
+ abend(EX_CANTCREAT, "$@ exited with status $e");
+ }
+ waitpid($logpid, 0) if defined $logpid;
+}
+
+sub gnulib_init {
+ my $gnulib = 'gnulibinit';
+ unless (-l $gnulib) {
+ symlink('gnulib/build-aux/bootstrap', $gnulib)
+ or abend(EX_CANTCREAT, "can't symlink gnulib/build-aux/bootstrap: $!");
+ }
+ error("Bootstrapping gnulib", fd => \*STDOUT) if $verbose;
+ run('sh', $gnulib, @gnulib_options);
+}
+
+END {
+ cleanup;
+}
+
+$SIG{HUP} = $SIG{INT} = $SIG{QUIT} = $SIG{TERM} = \&cleanup;
+
+#
+GetOptions("h" => sub {
+ pod2usage(-message => "$progname: $progdescr",
+ -exitstatus => 0);
+ },
+ "help" => sub {
+ pod2usage(-exitstatus => EX_OK, -verbose => 2);
+ },
+ "usage" => sub {
+ pod2usage(-exitstatus => EX_OK, -verbose => 0);
+ },
+ "add|new|a" => \$addmod,
+ "dry-run|n" => \$dry_run,
+ "verbose|v+" => \$verbose,
+ "modules|m" => \$modules,
+ "gnulib-srcdir=s" => sub { push @gnulib_options, "--$_[0]=$_[1]" },
+ "skip-po|no-git" => sub { push @gnulib_options, "--$_[0]" }
+) or exit(EX_USAGE);
+
+abend(EX_USAGE, "must run from the Dico source tree topmost directory")
+ unless checksrc();
+
+++$verbose if $dry_run;
+
+if ($addmod) {
+ abend(EX_USAGE, "not enough arguments") unless @ARGV;
+ foreach my $mod (@ARGV) {
+ create_module($mod);
+ }
+ modproc();
+} elsif ($modules) {
+ abend(EX_USAGE, "too many arguments") if @ARGV;
+ modproc();
+} elsif ($#ARGV >= 0) {
+ abend(EX_USAGE, "too many arguments; did you mean --new?");
+} else {
+ abend(EX_USAGE, "this does not look like a clone of the Dico repository; try $progname --help for more info")
+ unless -d '.git';
+
+ error("Initializing submodules", fd => \*STDOUT) if $verbose;
+ run('git submodule init');
+ run('git submodule update');
+ modproc();
+ gnulib_init();
+}
+
+exit($status);
+
diff --git a/stub.ac b/configure.boot
index 7e9b812..e518ece 100644
--- a/stub.ac
+++ b/configure.boot
@@ -1,13 +1,17 @@
## This file is a source for configure.ac. -*- autoconf -*-
-## Run ./modinc to create it.
-## Run ./modinc --help for a detailed description.
+## Run ./bootstrap to create it.
+## Run ./bootstrap --help for a detailed description.
## A short reminder:
## 1. Comments starting with ## are removed from the output.
## 2. A construct <NAME> is replaced with the value of the variable NAME.
-## 3. Everything else is reproduced verbatim.
+## 3. <NAME#TEXT> on a line alone (arbitrary leading characters allowed)
+## is replaced with (multiline) expansion of NAME. The second and
+## subsequent lines are prefixed with TEXT (or leading characters, if
+## TEXT is empty).
+## 4. Everything else is reproduced verbatim.
dnl <HEADING#>
dnl Process this file with -*- autoconf -*- to produce a configure script.
# This file is part of GNU Dico
# Copyright (C) 1998-2000, 2008-2010, 2012-2016 Sergey Poznyakoff
#
# GNU Dico is free software; you can redistribute it and/or modify
diff --git a/modinc b/modinc
deleted file mode 100755
index 5b88051..0000000
--- a/modinc
+++ /dev/null
@@ -1,641 +0,0 @@
-#! /usr/bin/perl
-# This file is part of GNU Dico
-# Copyright (C) 2014, 2016 Sergey Poznyakoff
-#
-# GNU Dico is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# GNU Dico is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Dico. If not, see <http://www.gnu.org/licenses/>.
-
-=head1 NAME
-
-modinc - Recreate Dico module autoconf structure
-
-=head1 SYNOPSIS
-
-B<modinc>
-[B<-ahnv>]
-[B<--add>]
-[B<--help>]
-[B<--new>]
-[B<--dry-run>]
-[B<--verbose>]
-[I<NAME>...]
-
-=head1 DESCRIPTION
-
-Recreates F<configure.ac> and F<modules/Makefile.am> from stub files
-F<stub.ac> and F<modules/stub.am>. The list of modules is obtained
-from the contents of the F<modules> directory -- each subdirectory
-is supposed to contain one module.
-
-Additional F<configure.ac> code for each module is obtained from
-file F<module.ac> in each module directory. See the description of
-this file in section B<FILES>.
-
-When run with B<-a> (B<--add>, B<--new>) option, the program creates
-basic infrastructure for modules named in the command line. For each
-I<NAME> it creates directory F<modules/I<NAME>>. Withih that directory,
-it creates two files: F<Makefile.am> from F<modules/template.am>, and
-F<I<NAME>.c>, which contains a stub code for the module.
-
-The program must be run from the Dico source tree topmost directory.
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<-a>, B<--add>, B<--new>
-
-Create basic infrastructure for modules named in the command line and
-add them to F<configure.ac> and F<modules/Makefile.am>
-
-=item B<-n>, B<--dry-run>
-
-Don't do anything, just print what would have been done.
-
-=item B<-v>, B<--verbose>
-
-Increase output verbosity. Multiple options accumulate.
-
-=back
-
-The following options cause the program to display informative text and
-exit:
-
-=over 4
-
-=item B<-h>
-
-Show a short usage summary.
-
-=item B<--help>
-
-Show man page.
-
-=item B<--usage>
-
-Show a concise command line syntax reminder.
-
-=back
-
-=head1 FILES
-
-The following files are used as templates to create output files. When
-creating output file, each line from the corresponding template is read,
-I<macro expansion> is performed, and the resulting string is written to the
-output file.
-
-During macro expansion, each occurrence of B<< <I<NAME>> >> is replaced with
-the contents of the macro variable I<NAME>, if it is defined. Expansion
-of undefined variables leaves the text as is.
-
-The construct B<< <I<NAME>#I<TEXT>> >> is expanded if it appears on a line
-alone, possibly preceded by any string of characters. It works similarly
-to B<< <I<NAME>> >>, except that if I<NAME> expands to multiple lines, the
-second and subsequent lines of expansion are prefixed with I<TEXT> on output.
-If I<TEXT> is empty, the content of the source line immediately preceding the
-construct is used instead. This makes it possible to use expansions after a
-comment character. E.g. if the variable B<HEADING> contains:
-
- This file is generated automatically.
- Please, do not edit.
- See the docs for more info.
-
-and the input file contains:
-
- dnl <HEADING#>
-
-Then, the resulting expansion will be:
-
- dnl This file is generated automatically.
- dnl Please, do not edit.
- dnl See the docs for more info.
-
-The macro variables are specific for each file, and are described below.
-
-For each file, a special comment sequence is defined. Lines beginning
-with that sequence are omitted from the output.
-
-=over 4
-
-=item F<stub.ac>
-
-Produces the F<configure.ac> file. Comment marker is B<##>.
-The following variables are defined:
-
-=over 8
-
-=item B<MODULES>
-
-B<Autoconf> code for each module, obtained from the F<module.ac>
-files.
-
-=item B<HEADING>
-
-Generates an initial header text, warning the reader that the file is
-generated automatically and informing him about the ways to recreate
-that file.
-
-=item B<STATUS_OUTPUT>
-
-A list of printable description for modules that can be disabled. Each
-module is represented with a line
-
- MODNAME ................ STATUS
-
-where MODNAME is the module name and STATUS is the module status variable
-(which produces B<yes> or B<no> at configure time, depending on whether
-the module is enabled or not).
-
-This is intended for use in B<AC_CONFIG_COMMANDS>.
-
-=item B<STATUS_DEFN>
-
-A list of assignments for module status variables, intended
-for use in B<AC_CONFIG_COMMANDS>.
-
-=back
-
-The following code illustrates the use of the latter two variables:
-
- AC_CONFIG_COMMANDS([status],[
-echo<STATUS_OUTPUT>
-],
- [<STATUS